The Tiger Claw TC-G Hidden Fastener system by FastenMaster is ACQ-compliant and compatible with grooved boards including Trex, Fiberon, Wolf, Veranda, Brazilian Redwood, Ipe, Ironwood, Teak, Cambara, and more. The Tylon coated blades are up to 1.5 times more resistant to abrasion than normal standard lacquered blades, giving improved longer tool life.

Deck Jig Vs. CAMO: Differences And What You Should Pick Kreg Deck Jig Vs. CAMO: Differences And What You Should Pick

Kreg is much easier to work with when it comes to unscrewing. Since it is an open system, the screws are easier to undo so you won’t have much trouble. A 1/8” gap can easily be accomplished through the use of an 8d nail. Lay the boards in place, using several 8d nails as spacers. While pushing the board flush against the spacers, secure the board into place with your choice of fastener.

This makes the wood less susceptible to cupping, warping, expanding and contracting that wet wood typically undergoes. This means KDAT can be installed with a 1/8-inch gap. It should be noted that KDAT does need to be immediately stained and sealed after installation to protect it from the sun. We aim to supply the best products possible. Please be aware of other outlets selling 'Sub-Standard' Balau!

Kreg Deck Jig System - Biven Machinery Sales Kreg Deck Jig System - Biven Machinery Sales

These boards come finished with two different profiles, giving you the ultimate flexibility and allowing you to get creative with your outdoor space. If you can acclimate your wood, cover it and make sure it is not sitting directly on the ground, so it doesn’t soak up rain or groundwater. The tool automatically creates 3/16-inch spacing. The cool thing about this tool is that it allows you to get exact spacing while at the same time installing your fasteners, saving you a significant amount of time. Please Note: We recommend that you keep your Balau dry and away from moisture until it is time to lay it, as timber is a natural product and is subject to continual movement when exposed to atmospheric conditions. This may be evident with splits, shakes or warping. These are not considered to be a fault or defect. Please allow a small percentage for waste.

Phone:

Remember: It’s important to keep your Balau dry and away from moisture until it’s time to lay it. Timber is a natural product and may exhibit splits, shakes or warping when exposed to atmospheric conditions - but these small imperfections are generally considered typical features of the species. Camo is pretty much professional level. It is made for professional people who carry more tools but need something efficient. So if you’re a beginner, don’t reach for the Camo tool. Since 1843, Stanley has been delivering hardworking, innovative and powerful tools that tradespeople can trust and to help Pro’s get the job done better. Also, keep in mind that this is an entire hidden fastener system, so the price point will be higher. Kreg is easier to unscrew and redo. Camo on the other hand needs more work and isn’t always smooth with reversing.